URG1D40S6N
Bradford White 40-gallon atmospheric vent gas water heater, 40,000 BTU.
Replacement parts that fit the URG1D40S6N
46 parts, from Bradford White's own parts list. Every part number links to the full list of models it fits.
Thermostat & controls
- 222-49008-01 — Gas Control Kit
- 239-43676-03 — Thermal Switch
- 239-45560-00 — FVIR sensor
- 239-45648-00 — FVIR sensor clip
- 239-48341-00 — FVIR sensor mount plate
- 239-49008-01 — Gas Control Kit
- 239-49720-00 — ULN FV sensor, RTD & thermal switch harness
- 415-45560-00 — FVIR Sensor
Burner & ignition
- 228-48383-18 — Burner
- 234-18194-36 — Main Burner Orifice 0 Ft. to 2,000 Ft.
- 234-18194-41 — Main Burner High Altitude Orifice 0 Ft. to 7,000 Ft. (-475 model suffixes)
- 239-46201-00 — Manifold Mount
- 239-46695-00 — Assembly Manifold Mount
- 265-48175-04 — Pilot assembly kit without door gaskets
- 265-51547-00 — Pilot Assembly kit with door gaskets
Dip tube & heat traps
- 229-51230-24 — Cold Water Inlet Dip Tube (PEX)
- 239-45167-00 — Heat Trap Insert (Outlet)
- 239-51556-00 — Heat Trap Insert (Inlet)
- 265-51572-00 — Kit-Heat Trap Insert
- 415-45167-00 — Heat Trap Insert (Outlet)
- 415-51230-24 — Cold Water Inlet Dip Tube (PEX)
- 415-51556-00 — Heat Trap Insert (Inlet)
Anode rod
- 224-32999-42 — Hot Water Outlet Anode (Aluminum)
- 224-47776-19 — Hot Water Outlet Anode (Magnesium)
- 224-49560-08 — Hot Water Outlet Anode (A420 Aluminum)
- 415-55482-00 — Hot Water Outlet Anode (Magnesium)
- 415-55484-00 — Hot Water Outlet Anode (Aluminum)
- 415-55486-00 — Hot Water Outlet Anode (A420 Aluminum)
Valves
- 230-40594-02 — T&P Relief Valve
- 239-43740-01 — ASSE Approved Mixing Valve (Optional)
- 239-51778-00 — ASSE Approved Mixing Valve (Optional)
- 265-42351-02 — Drain Valve (Brass)
- 415-40594-02 — T&P Relief Valve
- 415-42351-02 — Drain Valve (Brass)
Fasteners & brackets
- 239-32761-00 — Screw #8-18 X 1/2 HWH (1 req'd)
- 239-43967-00 — Screw #6-20 X 3/8 PHCR (2 req'd)
- 239-44113-00 — Screw #10-12 X 3/4 HWH (2 req'd)
- 239-44195-00 — Screw #8-15 X 3/4 INHXWS (2 req'd)
- 239-52581-00 — Screw #10-12 X 3/4 HWH (2 req'd)
Doors, jacket & panels
- 239-46209-00 — Outer Door
- 239-50664-03 — Inner Door Right Side Assembly
- 239-51576-00 — Kit-Inner Door Gasket
Blower & venting
- 239-50660-00 — Flue Damper
- 243-45787-00 — Draft Diverter
- 243-51285-00 — Flue Baffle
Fittings & plumbing
- 233-46930-01 — Flexible Gas Feedline
Specifications
| Capacity (gal) | 40 |
|---|---|
| EF (pre-2017) | 0.62 |
| BTU/hr input | 40,000 |
| Recovery (GPH) | 43 |
| Jacket dia (in) | 20 |
| Depth (in) | 24 3/4 |
| Vent size (in) | 3x4 |
| Water conn NPT thread (in) | 3/4 |
| Gas conn size (in) | 1/2 |
| Ship weight (lb) | 151 |
DOE storage (gal): not published on this document
First hour (gal): not published on this document
UEF: not published on this document
Other models on the same Bradford White spec sheet
- URG1D40T6NBradford White 40-gallon atmospheric vent gas water heater, 40,000 BTU.
Sources
- Bradford White parts list 238-51518-00 (revision A) PDF, bradfordwhite.com
- Bradford White parts list 238-51518-00 (current revision) PDF, bradfordwhite.com
- Bradford White spec sheet 1118 PDF, bradfordwhite.com